Blackvue dash cam keeps restarting how to#
Blackvue dash cam keeps restarting for mac#
Blackvue dash cam keeps restarting install#
Blackvue dash cam keeps restarting upgrade#
Blackvue dash cam keeps restarting pro#

I tested the leads for the fuse taps as I went along with a multimeter to make sure I had a constant power on for one, and one that turned on with the car. Everything is now all buttoned up and the camera is working great!Īgain, thanks to everyone on the thread, I really appreciate your help! The camera records fine now but I frequently hear the camera saying 'Restarting', then a minute or so later, 'Starting normal recording'. I replaced the card with a new Sandisk 64 gig unit and formatted it using the newest version of the desktop app and updated the camera to the latest firmware. I tested the leads for the fuse taps as I went along with a multimeter to make sure I had a constant power on for one, and one that turned on with the car. It started with the camera giving me SD card errors. In the accessory slots for each fuse tap, I added 5 amp fuses to be used by the camera. Fuse 23 is the 10 amp fuse for the switches/power windows/rear view mirror.

Fuse 2 is the 7.5 amp fuse for the power mirror memory module/memory seat module. I used two Bussman micro2 fuse taps as suggested in video that I got from Autozone to tap into fuse's 2 and 23 on my GT. Looking into my camera after mentioning his had the battery saver already as a part of it, my camera also had battery saving settings built in.

Blackvue dash cam keeps restarting pro#

I finished hardwiring my camera and did not use the Power Magic Pro that I had also bought.

Blackvue dash cam keeps restarting install#

Just wanted to provide an update to my install and say thank you again to everyone who shared their installs and insight! Any advice or clarification on if I am doing something incorrectly or am understanding something wrong is greatly appreciated. I currently have a pack of micro2 fuses for my car along with the fuse taps and am planning on using the smallest fuse I have (5 amps) for the secondary slot of the fuse taps for the camera and am planning on using fuses 2 and 23. I know that there is little chance of a camera blowing anything but I want to do it right, understanding the reasons why the install should be done the way it is. I read that the fuses in a fuse tap stack, so if I have the original 7.5 amp fuse in the primary slot and a 5 amp fuse in the secondary slot for the camera, the fuses wont blow until 12.5 amps pass through the fuse tap setup? Is that correct? I know the video was incorrect in going with a higher fuse in the secondary slot but I am confused as to how the math works for using fuse taps and want to make sure I install it correctly. In addition, I should be using the smallest fuse possible in the secondary slot for the camera as to avoid wrecking the wiring harness. Looking at other forum posts (like this one: ), it seems that I should use fuses 2 and 23 instead. He also put higher fuses in the secondary slot than the primary fuse to 'avoid blowing the fuses for the camera'.

In the video, he installed the Power Magic Pro using fuse taps into fuses 2 and 36. Most of my knowledge of this setup and install came from the following YouTube video: I want to clean up the look of this install and bought BlackVue's Power Magic Pro to have the power come from the interior fuse box instead. I currently have a BlackVue DR750X-2CH and have had it set up in my 2019 Mustang GT for about a year, with it powered by the cigarette lighter outlet. I have been looking at various YouTube installation videos and forum posts, but seem to keep finding conflicting information which has me concerned as I try to clean up my dashcam install.

Blackvue dash cam keeps restarting how to#

The firmware is upgraded to the previously saved language.As the title suggests, I am looking for advice and clarification on how to install a dashcam.Your saved settings are not affected by firmware upgrade.Doing so may damage the data and cause a malfunction of the microSD card. Do not insert or remove the microSD card when the dashcam is turned on.

Blackvue dash cam keeps restarting upgrade#

Any power interruption may prevent the firmware upgrade from completing, resulting in malfunction. Make sure the power remains on until the upgrade is completed.

Insert the microSD card into the dashcam and connect the power to initiate the firmware upgrade. Unzip the downloaded file and copy the BlackVue folder to the microSD card.ĩ. Go to the BlackVue website ( > Support > Download) and download the latest firmware for your BlackVue dashcam model in zip format.Ĩ. Check the current firmware version of your BlackVue dashcam and proceed only if your version is not the latest one.ħ.

Blackvue dash cam keeps restarting for mac#

For Mac users, click and select About BlackVue from the menu.ĥ.Select SD Card Viewer and click on the About button. Connect the microSD card reader to a computer.Ĥ. Insert the microSD card into the microSD card reader.Ģ. ( NOTE: All BlackVue models follow this method of firmware upgrade)ġ. Visit the BlackVue website ( to check for any new firmware releases for your BlackVue dashcam model. Keep your BlackVue dashcam updated by upgrading the firmware to the latest version. Upgrading the firmware using a computer (Windows/macOS)